◎学习与工作经历
2008.09-2012.06 成都理工大学能源学院，石油工程，工学学士学位
2012.09-2015.06 成都理工大学能源学院，油气田开发地质，工学硕士学位
2013.10-2015.03 中石油勘探开发研究院廊坊分院，煤层气所，实践实习
2015.09-2021.06 成都理工大学能源学院，油气田开发工程，工学博士学位
2019.01-2019.12 加拿大阿尔伯塔大学工程学院，石油工程，联培博士
2021.11-2025.03 成都理工大学能源学院，油气地质系，师资博士后/讲师/硕导
2025.04至今 成都理工大学能源学院，油气工程系，讲师/硕导
◎研究方向
提高采收率、油田化学
◎主讲课程
《油田化学》、《提高采收率》
◎主持或参与的科研课题
2024.07-2026.06：科技创新创业苗子工程重点项目，聚合物/表面活性剂复合驱油体系对粘性指进现象的影响机制研究，主持；
2022.11-2024.11：四川省博士后创新人才支持项目，耐高温延迟交联凝胶堵漏剂的研制及堵漏机理研究，主持；
2023.07-2024.06：四川省中央引导地方科技发展专项项目，微纳米限域空间二氧化碳强化页岩气流动机理研究，主研；
2022.01-2023.12：四川省应用基础研究项目自由探索型，超级绝热材料在高温地层井壁形成绝热泥饼的作用机制研究，主研；
2022.01-2023.12：四川省自然科学基金青年科学基金项目，用于分段压裂裂缝监测的DNA示踪剂的构建，主研；
2020.01-2023.12，中国国家自然科学基金面上项目，用于分段压裂裂缝监测的多功能纳米示踪体系的构建，主研；
2017.04-2022.04：加拿大国家自然科学基金Principal Investigator项目，Improvement of Heavy-Oil/Bitumen Recovery Efficiency by New Generation Chemicals and Optimization Models，主研；
2017.01-2020.12：中国国家自然科学基金面上项目，超低渗透油藏的岩石界面油水活化和驱油机理研究，主研；
2015.01-2016.12：四川省科技计划项目，页岩压裂液多功能助排剂的研发及在川南页岩储层的助排机理研究，主研。
◎获奖情况
2023年度，中国石油和化工自动化应用协会，微纳米材料堵水关键技术及应用，科技进步奖二等奖（3/8）
◎荣誉称号
-
◎论文
Huang J, Babadagli T. 2021. Mechanics of SAGD Efficiency Improvement Using Combination of Chemicals: An Experimental Analysis through 2D Visual Models[J]. SPE Res Eval & Eng, 24: 80–97.
Huang J, Zhong C, Yang Y. 2020. Aggregating Thermodynamic Behavior of Amphiphilic Modified Xanthan Gum in Aqueous Solution and Oil-Flooding Properties for Enhanced Oil Recovery[J]. Chemical Engineering Science 216: 115476.
Huang J, Zhong C, Yang Y.. 2020. Micellar Thermodynamic Behavior of Branch-Modified Xanthan Gum and Aggregating Structures in Aqueous and Saline Solutions[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects 587: 124317.
Huang J, Babadagli T. 2020. Efficiency Improvement of Heavy-Oil Recovery by Steam Assisted Gravity Drainage Injection Using New Generation Chemicals[J]. Energy & Fuels, 34(4): 4433-4447.
Huang J, Zhong C, Wu X. 2017. Shear Behavior at High Pressures and Viscoelastic Properties in Water and in Brine Solutions with High Salinities for a Tetra-Polymer Containing Poly(Ethylene Oxide) Side Chains[J]. RSC Advances, 7(75): 47624–35.
Lee J, Huang J, Babadagli T. 2022. Viscous fingering during heavy-oil displacement by chemical solutions: Emulsion instability and partial-miscibility[J]. Journal of Petroleum Science and Engineering, 209: 0920-4105.
Lee J, Huang J, Babadagli T. 2020. Dynamics of Emulsion Generation and Stability during Heavy Oil Displacement with Chemicals and Nanoparticles: Qualitative Analysis Using Visual 2D Data[J]. Fuel, 270: 117502.
Zhong C, Meng X, Huang J. 2021. Effect of high reservoir pressure on rheological properties of branched xanthan gum and polymer flooding behavior in porous media[J]. Petroleum Science and Technology, 1091-6466.
Zhong C, Lian X, Huang J, Li L. 2017. Surface and Interfacial Properties and Alteration Behavior of Wetting for a Polymeric Surfactant Containing Fluorine in Aqueous and Brine Solutions[J]. Industrial & Engineering Chemistry Research, 56(20): 5881–91.
◎专利
钟传蓉，黄晶晶，吴晓钢. 2018-01-10. 一种含表面活性长支链改性黄原胶的制备方法.中国, 201810021063.3[P].
钟传蓉，黄晶晶，马斌. 2016-01-13. 含纳米Fe(OH)3接枝丙烯酰胺共聚物絮凝剂的制备方法.中国, 201510662078.4[P].
钟传蓉，孟祥豪，黄晶晶. 2015-12-23. 聚硅酸铝铁-丙烯酰胺共聚物复合絮凝剂及其制备方法.中国, 201510492510X[P].
钟传蓉，苗娟，黄晶晶. 2016-03-30. 纳米聚硅酸铝铁-接枝改性淀粉杂化絮凝剂的制备方法.中国, 20150902967.3[P].
◎学术交流
Huang J, Babadagli T. 2020. SAGD efficiency improvement using chemicals: A visual analysis for proper chemical formulation and optimal injection strategies [C]. SPE Canada Heavy Oil Conference, September 29- October 2, Society of Petroleum Engineers.
Huang J, Babadagli T. 2019. Visual Analysis of SAGD with Chemical Additives[C]. SPE Kuwait Oil and Gas Show and Conference, Mishref, Kuwait, 13-16 October, Society of Petroleum Engineers. SPE-198041-MS.
Lee J, Huang J, Babadagli T. 2019. Visual Support for Heavy-Oil Emulsification and Its Stability for Cold-Production Using Chemical and Nano-Particles[C]. SPE Annual Technical Conference and Exhibition, Calgary, Alberta, Canada, 30 September - 2 October, Society of Petroleum Engineers. SPE-196023-MS.
◎行政职务及社会职务
