◎学习和工作经历

2021.01-----至今：成都理工大学能源学院

2016.09-2020.05：塔尔萨大学（美国），石油工程系，博士学位

2013.09-2016.06：中国石油大学（北京），油气井工程系，硕士学位

2009.09-2013.06：中国石油大学（华东），石油工程系，学士学位

◎研究方向

计算固体力学（包括弹塑性力学、连续介质力学、地质力学等）、PDC钻头力学建模及优化设计、油气井管柱力学、C++高性能计算

◎主讲课程

《钻井工程》、《C++程序语言设计》等

◎主持或参与科研课题

1.PDC钻头力学建模，塔尔萨大学TUDRP，2016-2020，主研

2.大位移井上提下冲下套管技术研究，中石油工程技术研究院，2013-2016，主研

3.伊拉克米桑油田钻井优化设计研究，中海油服公司，2013-2016，主研

◎论文

1.Chen, P., Miska, S., Yu, M., & Ozbayoglu, E. (2021). Modeling of Cutting Rock: From PDC Cutter to PDC Bit—Modeling of PDC Bit. SPE Journal, 26(06), 3465-3487.

2.Chen, P., Miska, S., Yu, M., & Ozbayoglu, E. (2021). Modeling of cutting rock: from PDC cutter to PDC bit—modeling of PDC cutter. SPE Journal, 26(06), 3444-3464.

3.Chen, P., Miska, S., Yu, M., & Ozbayoglu, E. (2020). Poroelastic modeling of cutting bottom-hole rock–Part I: Stress state of bottom-hole rock. Journal of Petroleum Science and Engineering, 107014.

4.Chen, P., Meng, M., Miska, S., Yu, M., Ozbayoglu, E., & Takach, N. (2019). Study on integrated effect of PDC double cutters. Journal of Petroleum Science and Engineering.

5.Chen, P., Meng, M., Ren, R., Miska, S., Yu, M., Ozbayoglu, E., & Takach, N. (2019). Modeling of PDC single cutter–Poroelastic effects in rock cutting process. Journal of Petroleum Science and Engineering, 183, 106389.

6.Chen, P., Miska, S. Z., Ren, R., Yu, M., Ozbayoglu, E., & Takach, N. (2018). Poroelastic Modeling of Cutting Rock in Pressurized Condition. Journal of Petroleum Science and Engineering, 169, 623-635.

7.Chen, P., Gao, D., Wang, Z., & Huang, W. (2017). Study on Aggressively Working Casing String in Extended-reach Well. Journal of Petroleum Science and Engineering, 157, 604-616.

8.Chen, P., Gao, D., Wang, Z., & Huang, W. (2015). Study on Multi-segment Friction Factors Inversion in Extended-reach Well Based on An Enhanced PSO Model. Journal of Natural Gas Science and Engineering, 27, 1780-1787.

9.Huang, W., Gao, D., Wei, S., & Chen, P. (2015). Boundary conditions: a key factor in tubular-string buckling. SPE Journal, 20(06), 1-409.

10.Xi, B., Gao, D., & Chen, P. (2015). Uncertainty analysis method for intersecting process of U-shaped horizontal wells. Arabian Journal for Science and Engineering, 40(2), 615-625.

◎专利

1.       陈鹏举, 黄根炉, 李曹雄. 一种控制点约束条件下的侧钻水平井轨道设计方法. CN10369****B